PLEASE READ CAREFULLY THIS DESCRIPTION, IS FOR THE MACHINE SAFETY AND BEST PERFORMANCE

-Improved mechanism, little bit faster and no more problems with any type of Grommets
-DO NOT BEND THE NEEDLES BAR, JUST BEND A VERY LITTLE BIT THE NEEDLES GROUP
-Compact and well balanced on your hand
-Aluminium frame + Iron side plates, just 134 gr. weight
-6 volts motor
-Recommended to use at 4.2-5.5 volts
-Fixed 4 mm stroke
-No setup, No tuning, No adjustment, just Plug and Play
-Hitting Screw on the bar, give you a nice punch with some give, similar to a coils machine hit
-If you like push line or pack colors with standard rotary machine, this one just do it faster and more easily
-Clipcord connection, positive pole RED down position
-Can run Regular Needles and Cartridges
-For use with Cartridges, please add the Extra Thick O-ring that come with the machine to the bar mechanism, check the last pic for understand
-5-11 loose liner needles
-5-15 mag needles
-NEVER RUN HIGHER than 6 volts and lower than 4 volts, for the motor safety
-NEVER RUN ON POWER SUPPLY OR BATTERY PACK WITH JUMP-START MODE ON, PLEASE DEACTIVATE THIS OPTION OR GONNA DAMAGE THE MOTOR
-1.5 mm hexagon key and extra O-rings included

-DO NOT TRY TO REGULATE THE HITTING SCREW, IT COME SETUP IN THE PERFECT POSITION, AFTER VARIOUS HOURS OF WORK THE SCREW CAN WEAR OUT A BIT AND LOOSE LITTLE BIT THE PUNCH, ONLY AT THIS POINT U CAN ADJUST THE HITTING SCREW IN THIS WAY:

1- GRAB THE HEXAGON KEY COME WITH THE MACHINE AND RELEASE A BIT THE TINY SIDE SCREW ON THE BAR
2- TURN CLOCKWISE THE HITTING SCREW 1/5 OF TURN
3- CLOSE AGAIN VERY CAREFUL THE SIDE TINY SCREW

-NEVER SPRAY ANY GERMICIDAL DIRECT ON THE MACHINE, TO CLEAN SPRAY ON PAPER TOWEL AND WIPE GENTLE THE MACHINE, ALL LIQUID THAT CREATE CORROSION GONNA REDUCE THE LIFE OF ALL THE MECHANICAL PARTS INCLUDED BEARINGS AND MOTOR

shipped from GERMANY

PLEASE CHECK THE VIDEO ABOUT THIS SPECIFIC MACHINE ON MY YOUTUBE CHANNEL

https://www.youtube.com/watch?v=8k_xVw51UiA&t=7s