PLEASE READ CAREFULLY THIS DESCRIPTION, IS FOR THE MACHINE SAFETY AND BEST PERFORMANCE

-FOR REGULAR NEEDLES AND CARTRIDGES
-DESIGNED TO HAVE BEST PERFORMANCE AS POWERLINER WITH REGULAR NEEDLES
-Sixth generation of my Turbodrive Hybrid Rotary
-Brass and Bar made of solid Brass, help absorb vibrations and stabilize the machine + Motor cover made of Aluminium
-156 gr. weight
-12 volts motor
-Large Eccentric wheel to increase Torque and Power
-Clipcord + front RCA connection, for use any type of cord and Battery pack
-Clipcord Positive pole always on lower position, check the RED color on the contacts, motor spin Clockwise for best performance
-Wise Lock Screw with a helpful tool integrated to Enlarge Needles Bar Loop and reduce Ink Spitting problems
-Up to 18 liner RS-RL
-Up to 25 mag, maybe more depending from your work technique
-Adjustable stroke up to 4.4 mm
-The machine come setup at maximum stroke
-Infinity turn Stroke Wheel, simple turn the Black Stroke Wheel with fingers in any sense to adjust the stroke, no Tools required, 180° turn in any sense bring the original Maximum stroke setup to the Minimum stroke, other 180° turn in any sense bring back at the Maximum stroke, adjust in between to find your sweet spot
-Hitting Screw on the bar to create a sharp Hit, if you don't want the machine too noisy just Unscrew it a bit and the bar gonna hit directly on the 2 O-rings with lot of Punch anyway
-The machine is tuned at 6.2 volts and Maximum Stroke with 18 loose Regular liner needles and stainless steel tube
-Recommended to use at 6-7.5 volts
-FOR CARTRIDGES PLEASE ALWAYS ADD THE RUBBER BAND AS SHOW ON THE LAST PIC and use a Medium 90 mm Push Bar
-It come with 1 extra Flat Spring, 1 hexagon key 1.5 mm for adjust the Hitting Screw, a bunch of NIM Rubber Bands and Crystal Hard Grommets, Warranty Certificate and Instructions Paper

FOR THE BEST OUTLINE use our LINING BLACK from www.thesolidink.com , your Blackest lines, guaranteed

-ONLY USE NIM CRYSTAL GROMMETS, OTHER BRAND HARD GROMMETS OR PAPER, CHEAP SOFT GROMMETS SNAP EASY

-DO NOT RUN THE MACHINE WITHOUT NEEDLES AND TUBE SETUP

-DO NOT RUN THE MACHINE LOWER THAN 5 VOLTS OR HIGHER THAN 8 VOLTS, WITH REGULAR NEEDLES

-DO NOT RUN THE MACHINE LOWER THAN 6 VOLTS OR HIGHER THAN 8 VOLTS, WITH CARTRIDGES

-IF YOU USING A BATTERY PACK WITH JUMPSTART OPTION ENABLE, CAN START RUN THE MACHINE FROM 4.5 VOLTS, WITH REGULAR NEEDLES OR CARTRIDGES

-DO NOT PUT OIL, GREASE OR ANY OTHER LUBRICANTS IN ANY MACHINE PARTS

-NEVER SPRAY ANY GERMICIDAL DIRECT ON THE MACHINE, TO CLEAN SPRAY ON PAPER TOWEL AND WIPE GENTLE THE MACHINE, ALL LIQUID THAT CREATE CORROSION GONNA REDUCE THE LIFE OF ALL THE MECHANICAL PARTS INCLUDED BEARINGS AND MOTOR

-PLEASE WATCH THIS VIDEO ABOUT THE MACHINE IN MY YOUTUBE CHANNEL

https://www.youtube.com/watch?v=kP_tq-3hKyk

shipped from GERMANY